Do 32A sockets need RCD protection?
Under the new 18th Edition, all final circuits rated 32A or less need RCD protection to at least 30mA earth leakage. There is no exclusion for 3 phase circuits, so this will cover all 16-amp, 32 amp, single and three phase sockets.
Where is additional protection required?
Additional protection by RCD is a requirement for low voltage cables concealed in a wall at a depth less than 50 mm from the surface of a wall or partition, or concealed at any depth in a partition the internal construction of which contains metallic parts.
Is an RCD required by law?
RCDs protect humans against electrocution in a way that fuses and circuit breakers do not. … If you have a new circuit installed, or a circuit is substantially modified, you may be required to have an RCD fitted under the Building Regulations (Part P) or BS7671 wiring regulations. This is a legal requirement.
Does a 3 phase outlet need to be RCD protected?
3, no RCD protection is required where a socket-outlet, luminaire or single item of electrical equipment that is not RCD-protected is replaced with an equivalent in the same location. Like for like replacement.
Do all circuits need RCD protection 18th edition?
“Regulation 411.3. 4 specifies that additional protection from a 30mA RCD is now required for all lighting circuits in domestic properties, without exception.
Do you need a 100mA RCD on a TT system?
If the distance of the supply tails to the c/u from the suppliers cut-out is greater than 3mtrs then (in a TT system) the tails will need protected with a 100mA RCD.
What is the difference between fault protection and additional protection?
The fault protection refers to cases like TT were the max Zs cannot be met so in a TNCS situation the RCD would not generally be required for fault protection because the Zs readings would be within limits. Additional protection is that extra bit of safety for sockets outside for eg.
What does additional protection mean?
To give or be protection against something unpleasant means to prevent people or things from being harmed or damaged by it.
Do air conditioning units need RCD protection?
Air conditioners, electric hot water systems, hotplates and ovens require a safety switch. All other final sub-circuits not in excess of 32A are to be assessed RCD compatible and if so “should be” RCD protected.