Machine guards are your first line of defense against injuries caused by machine operation. Each machine must have adequate safeguards to protect operators and other employees in the immediate work area from hazards created by ingoing nip points, rotating parts, sparks and flying debris.
What must a machine guard do to prevent injuries?
Prevent Contact –The safeguard must prevent hands, arms or any other part of a workman’s body from making contact with dangerous moving parts, hot/ cold surface, harmful fluids and any other hazardous material from all directions.
Do guards prevent accidents on power machines?
Moving machine parts have the potential to cause severe workplace injuries, such as crushed fingers or hands, amputations, burns or blindness. … Safeguards are essential for protecting workers from these preventable injuries.
Why is machine guarding important?
The purpose of machine guarding is to protect the machine operator and other employees in the work area from hazards created during the machine’s normal operation. This would include hazards of concern such as: ingoing nip points, rotating parts, reciprocating, transversing, and/or flying chips & sparks.
What is the purpose of a safety guards in a machine tool?
The safeguards prevent workers hands, arms and other body parts from making contact with dangerous moving parts. Special guards, enclosures or personal protective equipment have been provided, where necessary to protect workers from exposure to harmful substances used in machine operations.
What guards are OK to remove on machine?
Interlocking guards, also known as barrier guards, automatically shut off or disengage the power source when the guard is open or removed. These are particularly useful in situations where operators need to be able to open the guard or access the guarded parts of the machine, such as when clearing jams.
Who is allowed to remove a machine guard?
Guards attached to mechanical equipment protect you from the moving parts of machines. Machine guards must never be removed and if a guard is damaged or missing, the machine must not be used until it can be repaired or replaced. A missing or damaged guard must be reported at once.
What interlocked guards?
‘Interlocked physical barriers’ (interlocked guards), such as enclosure guards, are known as ‘movable guards’ and are interconnected with the power or control system of the machine. The interlock prevents the machinery from operating unless the guard is closed.
Why are tool guards considered important what risks do they Minimise List 3?
Guarding is the most effective means of reducing the risk of injury or harm from dangerous parts of a machine. In its simplest form, guarding is a physical barrier preventing access to any part of a machine that has the potential to cut, pierce, graze or crush a person or a body part.
Which OSHA parts always require guards?
29 CFR 1910.212(a)(1) states that one or more methods of machine guarding must be used to protect operators and other employees from hazards, including those created by point of operation, in-running nip points, rotating parts, flying chips and sparks.
Who is responsible for machine guarding?
Therefore, the machine “designers” have compliance responsibility. But, in the U.S., OSHA clearly states that its regulations targets manufacturers, which we say are the end users (of machinery). OSHA states that every employer must have a safe work place.
What are the fundamental machine safety rules?
Always follow the instructions given. Always wear machine-appropriate personal protection equipment (PPE). Closed toe shoes protect your feet from impact and falling items and also reduce the risk of slips. Full wrap goggles shield your eyes from debris that may escape the guarding.