Your question: What locations in a residential home are GFCI protection required?

The NEC mandates GFCI protection in many areas of the home: bathrooms, garages, outdoor receptacles, crawl spaces, basements, kitchens and anything within six feet of a sink or water source. While that may seem like a lot, the entirety of a home is not covered.

Where do you need GFCI outlets?

GFCIs are required by the National Electric Code (NEC) in all kitchens, bathrooms, crawl spaces, unfinished basements, garages, and outdoor receptacle locations. Outdoor outlets also require special boxes and covers.

Where are GFCI not required?

GFCI protection is not required for receptacles that are not readily accessible, such as a ceiling-mounted receptacle for a garage door opener. Nor are they required for a receptacle on a dedicated branch circuit located and identified for a cord-and-plug-connected appliance, such as a refrigerator or freezer.

Do all outlets have to be GFCI?

Any 15-amp, 20-amp, or 120-volt outdoor outlet, must have GFCI protection. … There are similar outlet requirements for kitchens and bathrooms. Anywhere electricity might be used near water and/or flame, GFCI outlets are at least recommended, if not required, in order to guarantee your family’s safety.

THIS IS IMPORTANT:  What is WIFI Protected Mode?

What’s the difference between GFI and GFCI?

Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.

Do you need an electrician to install GFCI?

Do You Need an Electrician to Install a GFCI? If you have basic knowledge of electrical wiring, you may be able to install a GFCI without professional help. However, if you have older wiring and outlets, it may be best to let a certified electrician handle the job.

Can I put a GFCI anywhere in a circuit?

You can replace almost any electrical outlet with a GFCI outlet. Correctly wired GFCIs will also protect other outlets on the same circuit. … The electrical code also requires GFCIs in unfinished basements, garages, most outdoor receptacles and places where construction activity occurs.

How many outlets can one GFCI protect?

There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.

Can you have 2 GFCI outlets on the same circuit?

Yes, you can use two or more GFCI outlets on the same circuit without any problem at all. The only downside to this is that if one of your GFCI outlets goes down, the others will probably go down as well. … It is well worth putting two or more GFCI outlets on the same circuit, and it’s quite common.

Can the outlets in a bathroom be on the same circuit as the lights?

The main rule in 210.11(C)(3) states that the branch circuit provided to supply the bathroom receptacle outlet(s) shall have no other outlets. No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles.

THIS IS IMPORTANT:  How do you determine virtualization based security?

How much does it cost to install a GFCI outlet?

The national average materials cost to install a gfci outlet is $19.71 per receptacle, with a range between $17.68 to $21.74. The total price for labor and materials per receptacle is $154.04, coming in between $140.26 to $167.83.